POLARFOAM PF-7300-0 SOYA, is an environmentally friendly, high performance, closed cell rigid polyurethane foam used for insulation, and is spray applied exclusively by certified applicators. POLARFOAM PF-7300-0 SOYA is fully self-adhered to the substrate, which helps make your building physically much stronger.
More BENEFITS of POLARFOAM PF-7300-0 SOYA:
- An All-in-One system providing Insulation, air and vapour barrier (read more below)
- A durable high efficiency insulation system
- Generates Energy Efficiency that noticeably lowers utility bills
- Seals out dust and pollen
- Offers a Healthier, Cleaner In-House Environment
Green BENEFITS Include:
- Made from Recycled Plastics
- Made from Vegetable oil
- Zero Ozone Depletion Substance
- Ecological Insulation
POLARFOAM PF-7300-0 SOYA urethane foam insulation material is the perfect solution to building insulation design problems. POLARFOAM, from >PFSI, can be used to design buildings that are attractive and comfortable, inexpensive to operate and maintain. POLARFOAM PF-7300-0 SOYA insulating foam solves building insulating design problems as it combines proven thermal protection while also offering superior air barrier/vapour barrier protection.
POLARFOAM PF-7300-0 SOYA insulation material exceeds the requirements of a Type III air barrier as proposed by the National Research Council of Canada. The cost effective, one-step application process, makes POLARFOAM PF-7300-0 SOYA polyurethane foam from PFSI exactly what your building needs.
Want More Information! Check out the following:
.jpg)
Technical Data Sheet Polarfoam PF-7300-0 SOYA 
POLARFOAM PF-7300-0 SOYA - R Factor
POLARFOAM PF-7300-0 SOYA - CCMC # 13244-L 2011
POLARFOAM PF-7300-0 SOYA has been designed for use in the following building types
- Commercial
- Residential
- Industrial
- Agricultural
- Institutional
The All-in-One Wall System Concept puts insulation, air and vapour barrier into one product.
Insulation : Independent laboratory tests confirm the on site long term thermal performance of POLARFOAM PF-7300-0 SOYA spray foam insulation in the building envelope system increases thermal performance of the building envelope. The long term minimum insulating value is R-6/1 " RSI 1.05/25mm.
Air Barrier: Research shows that 40% of building heat loss can be attributed to air leakage conducted through the building envelope. Tests for air leakage conducted by an independent laboratory recognized by the CCMC show that POLARFOAM PF-7300-0 SOYA exceeds 500 times the requirements of the NBC as an air barrier material.
These results confirm that POLARFOAM PF-7300-0 SOYA is one of the highest performance air barrier materials on the market and this feature is the key element in an air barrier system that meets the objectives of the NBC
By creating a sealed air barrier and eliminating air filtration POLARFOAM PF-7300-0 SOYA does not allow wall condensation, that can often result in mold, mildew and wall degradation.
Vapour Barrier: Water vapour permeance is the speed to which water goes through a homogeneous material. The National Building Code, stipulates that a vapour barrier must have a water vapour permeance less than 1.05 PERM (60 ng/Pa*s*m2)
* 75 mm of POLARFOAM PF-7300-0 SOYA spray applied on an exterior gypsum board = 44 ng / Pa*s*m2 (0.77 PERM)
* 75 mm of POLARFOAM PF-7300-0 SOYA spray applied on concrete blocks = 22 ng / Pa*s*m2 (0.38 PERM)
You may need to download Adobe reader to view some documents from this page 
Last Updated on Wednesday, 31 October 2012 16:26
Testimonials
... I have been associated with the SPF industry for approximately twenty years now. I have watched this industry grow ... to become a highly respected industry leader in quality assurance in Canada. All of the PFSI staff exhibit an elevated level of professionalism, dedication and hard work which is reflected in the high level of success that PFSI enjoys.
See all testimonials here